You must log in or # to comment.
Not a big fan of having 2 screens.
A huge fan of ESP32 DIY E-Reader!
looks like shit no thanks
Great. Now i can get that “real book feeling” of wrestling the books pages to lie flat enough for me to read them as I lay down.
Look. Hackaday… If it’s a slow week… We get it. Take a day off. We still like you. Just… Less of this please.
The only reason I’d want 2 “pages” is so I could close it to protect the screen(s)… but that’s exactly what covers are for.
Apart from the tiny minority of people who might prefer the form factor/“book feel”, are there any actual advantages to having 2 screens for general reading?
It would probably work really well for graphic novels, since they do occasionally have panels or illustrations that span both pages.
It’s probably just for the people who want it. I have thought about how much nicer two pages would be in the past for this reason and for displaying sheet music.
I did consider less common uses like that, which is why I specified “general reading”. I prefer paper for my sheet music, but I’d choose something with a faster refresh rate than e-ink if I had to use something with a screen anyway.
Waste of energy.
Why not hundreds of screens so you can present all pages of a book at the same time and you just skip through the screen? Would be so much more convenient and innovative!
I’d get a whole bunch of these and keep a different book on each one, so you could just pick it up and read it. But it’ll never work, it’s too much trouble to keep them all charged.
I don’t like the fact that it has two displays. It’s unnecessary and makes it thicker and heavier.
I like the concept. I have a e-ink reader where I removed the hull because it’s annoying, but at some point I must have damaged the display a bit and now it has a little black spot. With this the added bulk also doubles the area available for text. Maybe not that useful for novels that you read through linearly, but for non-fiction it would be nice to see other chapters, glossaries, etc. on one display while keeping the other at the page you were reading. Mainly a problem of software and enough buttons to be able to comfortably use that.
Though the low-res displays of this prototype look atrocious to me (pixelation and uneven blackness), maybe a later version will improve on that.
How else would it recreate a book unless it had a folding display which would be even worse?
Books are made like this because it’s impossible to make them any other way, but a digital device can have just one “page” since you read one page at time like Kindles and Kobos
The other option is a scroll. historicaly I’m told a book was always a scroll and the factor we now call a book was a codex. (I don’t know how to verify this)
For some people, recreating the form factor of a book is the point, regardless of its convenience or cost. I’m sure whoever put this thing together was quite aware of how mainstream e-readers are built and didn’t want that, or they would have bought a Kindle or a Kobo.
I can imagine a future device with an e-ink page that’s so thin and flexible that it looks and feels like a paper book with magic changing text. I don’t know how many consumers would pay a premium for that, but I would definitely buy my wife one.
Nevermind the fact most readers and tablets come -with- a cover … So its almost like a book anyway. Which people fold behind the page. Like a book. What was that extra screen doing again?
a cover … Which people fold behind the page. Like a book.
Ho ho hold the fuck up
Mind blown.
Go old school and have it recreate a scroll. Really, not having to shift your head/eyes when reading is a plus with r-readers.
I read for hours on my tablet just fine. I don’t even see the need for e-ink displays, let alone this form factor. Also, I find the tablet easier to hold for hours, compared to a book.
In spite of all that, I kind of want one, I’ll admit. I have a 3D printer, maybe I’ll make one.
E-paper is easier to use outside or in bright light, and the battery tends to last longer. Anecdotally, it also doesn’t hurt my eyes as much.
I’ve tried. I really don’t want to have another “gadget” in my carbon footprint, but can’t avoid it. I’ve read in my tablet, it’s just too heavy. So, it’s gonna be a PC, a laptop, a tablet, a cellphone, and an eBook reader -_-
The only good side is I use them way more, I think, than your average person. The PC is almost ten years old, the laptop is like six yo, my cellphone is getting to 4 years of use, but the tablet is only a couple of years old and it was supposed to serve as a reader. Also, if I use my tablet just to read, it’s a waste of energy; eink devices are typically very efficient.
I’m just here to point out that the fact you genuinely care about your carbon footprint probably puts you ahead of 80% of the population, and the fact that it has materially affected your device choices probably puts you ahead of 80% of the remainder.
There’s definitely a unique satisfaction that comes from filling tech needs with hardware that already exists, and which does a great job at it too.
That goes across hobbies and mediums too. I just finished a big outdoor carpentry project where I was able to find perfect long-term uses for pieces of wood from The Initial Build in the construction of The New Hotness.
Did I miss something? Title is “DIY” but it looks like a sales page?
Welcome to modern astroturfing in the social media age.
There is a build page on the github for the device.
pair of 648×480 e-paper displays
Um lol no. I could see using a pair of Inkplate 10’s connected by (at least metaphorical)) duct tape. Doesn’t seem worth mucking with special hardware.
Every affordable e-reader I know of is simply too small though. I mostly want to read stuff like ArXiV preprints (A4 sized pdf’s) so would want at least a 13" screen. Someone a few days ago posted a link to a 14" Android tablet with a semi-reflective display at around $300. It seemed interesting but I’d rather degoogle.
There are some hinged Waveshare displays that look nice but they are regular TFT displays so wouldn’t be great for a portable e-reader with long battery time:
https://www.waveshare.com/product/displays/15.6inch-dual-monitor.htm
Hello there, just scrolling through and I saw your comment. You seem to know a bit about this topic. I’m currently thinking of buying a reader as I lost mine some time ago. I used a kobo and a kindle in the past and didn’t see much difference. However, this thing about reading papers seems really cool. I have tried in the past reading PDFs on those readers without much success.
Do you think you have good options for reading articles/manuals? Consider I end up printing about 50 pages a day in articles I read. If I can turn that into something digital that’d be cool.
If an 8-inch screen is enough for you, then I recommend either the Pocketbook Inkpad 4, or the Pocketbook Color 3 if you want color. They run Linux and have a very capable PDF Reader (especially compared to Kindles)
If you want an even bigger screen then sadly they start to get very expensive, and usually ship with an already outdated version of Android and an underpowered SOC. And they also have the terrible standby battery life you would expect from an Android device
I guess the size is good to me for reading. I guess the kindle and kobo I used to have were even smaller than that. For reading books that’s quite good to me and I never felt I needed something larger.
However, when I tried to read PDFs I had lots of problems. The readers either would show the full A4 page in the screen, which would make it unreadable, or show just a piece of the page and it would then be difficult to pan. I remember I had tried using some tools which would break up the PDF pages into pages which would be visualizable in such a screen, but that did not work too well especially when reading articles with two column layouts.
Ideally articles would be available as ePub, but that’s quite rare. The main point would be: if I get one such tool to read articles I can dedicate it to just that. But, I need it to be easy for such purpose: I don’t want to be panning up and down a page all the time. I don’t know whether that is possible and how that could work however, because indeed resizing is not one of the objectives of PDF.
I hope you get what you want. Me I want something I could put in my pocket.
The small kobo kinda fits in a jean pocket, easily in cargo shorts or inside jacket pocket. Only comfortable for reading novels though. I prefer a little bigger even if it isnt pocket size.
Oh hmm, I just use my phone for that. It doesn’t seem worth having an additional, limited purpose device. I assume a 7" e-reader is too big for a pocket.
The Inkplate 10 isn’t pocketable but it’s very light, easy to put in your backpack or whatever. I just wish they had a 13" version. The 13" Ipad Air is really very nice if you don’t mind Apple products.
There are also some folding phones now with largish screens. A buddy of mine has one and it’s nice. Too expensive for me though, and it’s more Android.
Being able to fold down a larger “sheet” display so that it fit in a pocket would be pretty cool. Having extra room for reading things like maps and comic books is so much better than pinching and zooming on a pocket sized display. What you call limited purpose, I call functional design. I’m kind of over all-in-one devices. They’ve turned into Jack of all trades, but master of none.
Obviously that’s not what this device is, but it got me thinking about why I’d want a device with multiple e-ink displays or a foldable display.
I just upgraded to a foldable phone and it’s a game changer to have an 8in screen in your pocket. Reading long form content is so much more enjoyable, and I’d love to have an E-ink reader that folds like my phone does.
Yeah most 7" readers have the page turning buttons on the side which usually makes the device too wide for pockets.
The 6" readers fit my pocket quite well… So a foldable dual screen 6" sound like a pretty nice upgrade.
Most of what I use my readers for are reflowable text like epubs… But I guess if you could show a single page from a PDF across both screens then it might actually be big enough to be able to read while still being pocketable… You would probably want to go with the high resolution e-ink screens, like the one in the Kobo Clara HD (1072 x 1448). A combined resolution of two of those would be 2144 x 1448,
Give PineTab a look. Pine64 makes open source hardware that is pretty cool.
You probably mean the PineNote, the 10 inch eink tablet. Pinetab is a normal tablet with a lcd screen.
This? https://pine64.org/devices/pinetab/
It’s just 10" and looks like an old design. Micro USB, oops. The Inkplate is 10" ESP32 epaper so it uses very little power. Alternatively there are tablet-style x86 laptops and I almost bought one last year. Now the price is way up due to DRAM shortages and so on, oops. I have some scrounged HDMI monitors so I want to try using one in portrait mode with my raspberry pi 400. If that works I could see getting one of the Waveshare dual screen monitors and maybe a Pi 500+.
EInk gets expensive fast as the size gets bigger. At 10” its hard not to just use an lcd and bigger battery.
Looks really nice. How much do you want for one? Surely not more than twice as much as the competition needs. /s
I’ll wait until they make one with 300 screens I can flip like a book.
I want VR recreations of famous libraries with full on books you can take off the shelves to read and homeless people washing their feet in the bathroom sinks
And each screen has infinite battery life! Oh and each is as flexible and light as I dunno, a sheet of paper maybe!
imagine a book you could plug in to change into a different book
