• MeatPilot@sh.itjust.works
    link
    fedilink
    arrow-up
    8
    ·
    7 hours ago

    I’d like to take a moment to say fuck the standard in the box plastic expansion drywall anchors

    Every other type of drywall anchor is better and only for a few cents more. These always go in the trash.

    • oatscoop@midwest.social
      link
      fedilink
      arrow-up
      6
      ·
      4 hours ago

      Toggle bolts. Not the shitty “spring toggles” – actual toggle bolts like Hilti’s HTB-2, Cobra’s “FlipToggle”, or Toggler’s “SnapToggle”. They’re strong and don’t drop the toggle down the wall if you take the bolt out. Only downside is you have to drill a bigger hole, you need to have enough clearance for them to “flip”, and removing them is more of a chore.

      These things:

    • Imgonnatrythis@sh.itjust.works
      link
      fedilink
      arrow-up
      3
      ·
      4 hours ago

      I hate fastening anything to drywall. To me all the different flavors of anchors are just a good indicator that there’s no damn good way to do this. Whenever I can get away with it, I will misuse drywall hooks to hang rather than fasten things to drywall.

      These are easy to install, leave only a pinhole in the wall and some are rated for 50lb loads.

      • MeatPilot@sh.itjust.works
        link
        fedilink
        arrow-up
        3
        ·
        2 hours ago

        💯 Those are my go to replacements. If it’s really heavy use toggle and probably try to find a stud to bare most of the weight.

        But for everything else threaded anchors. Sure they leave a bigger hole, but you get a much bigger hole if something falls out. Better to secure it right once.

        • Prove_your_argument@piefed.social
          link
          fedilink
          English
          arrow-up
          2
          ·
          2 hours ago

          You’re saying we need a bare stud to make the hole bigger.

          Are you’re sure you’re not the wife? With all the hammering with studs and all.

          I’m sorry I can’t help it.

      • TrackenDaKracken@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        2 hours ago

        I use these because you can take them out and reuse them, and the screw comes out and goes back in.

        Toggle bolts are stronger, but you can’t take the screw all the way out without losing the back piece, that limits their utility somewhat.

      • Sc00ter@lemmy.zip
        link
        fedilink
        arrow-up
        3
        ·
        5 hours ago

        My wife thinks these sucks. I cant convince her that these are not to be hammered into the drywall…

        I love em